Yes, it should. Mine measures 35.75″ wide..
Page Contents
What do you do if your refrigerator doesn’t fit?
How much space does a fridge door need to open?
When the door is open, is there enough space on the hinge side for the door to open without hitting your walls? If there’s not about 2-inches of space on the hinge side, then you’ll have to keep in mind that the refrigerator will need to be pulled out about 2-inches to make up for this.
How far out should a refrigerator stick out?
Do Fridges Need Space Around Them? In short, the answer is yes. Your fridge will need about two inches of space away from the wall in the back to allow for air circulation. On the sides, you’ll want your fridge to have about 1/8 inch for a standard fridge and about 1 inch on each side for cabinet depth.
How can I increase my fridge space?
Remove the lower and upper cabinets, as applicable, to create more space. You can either install narrower units so as not to completely lose an entire cabinet, or the refrigerator may take up the entire space.
How much space do I need to open a French door refrigerator?
A basic guide is to allow for 2 inches in the back, 1 inch at the top between the upper cabinets and the refrigerator and a minimum of 1/8 of an inch on either side of the fridge.
How much space is needed around a LG refrigerator?
All doors must be at least 30″ wide at their narrowest point. Be sure to account for knobs, latches, closers and screen doors. All hallways must be at least 30″ wide at their narrowest point, including shelves or other wall-mounted items. For corners or stairway landings, you’ll need 43.4″ to clear a 90° turn.
How do you know if a fridge will fit?
How much space do I need for a French door refrigerator? A basic guide is to allow for 2 inches in the back, 1 inch at the top between the upper cabinets and the refrigerator and a minimum of 1/8 of an inch on either side of the fridge.
How much wall clearance does a fridge need?
The refrigerator should be at least two inches from the wall. Top — If you have back coils, you will need at least two inches of top clearance to dissipate heat, but for bottom coils, as little as one inch can be sufficient. Sides — Regardless of coil placement, the sides require the least amount of space.
How do I fill the gap between my refrigerator and counter?
Trim kits are an easy and inexpensive way to fill the gaps between your fridge and cabinets. They come in a variety of sizes and colors, so you can find one that fits your kitchen perfectly.
How close can a refrigerator go to a side wall?
Side Clearance – Plan for between one-half inch to one-inch of clearance on both sides of the unit. Rear Clearance – Allow between one to two inches of space at the rear of the refrigerator for proper airflow. Top Clearance – Ensure there is a minimum of one-half inch to one-inch of clearance on top of the unit.
How far do refrigerators stick out?
Standard refrigerators are typically 32 to 36 inches deep or more, and since countertops are normally about 25 inches deep (24 inches for the base cabinet with a 1-inch overhang) this means that a standard refrigerator will stick out from adjoining countertops by 6 inches or more.
What is a standard fridge space in a kitchen?
The average fridge cavity is around 600mm.
What is a standard size refrigerator? Standard refrigerator sizes range from around 24 to 40 inches in width, 62 to 72 inches in height and 29 to 36 inches in depth. Generally speaking, french door and side-by-side refrigerators will be larger in width and height, though counter-depth models are frequently available in these two configurations.
How do you fill a gap between a fridge and a wall? Here are a few of our favorites:
- Filler strips. If you’re looking for an easy way to fill the gaps between your fridge and cabinet, you might want to consider using filler strips.
- Spacer panels.
- Shelves.
- Slide-out cabinets.
- Trim Kits.
Why are counter-depth refrigerators more expensive? Manufacturers make fewer counter-depth products compared to standard depth fridges which affects unit-level cost. In addition, manufacturers often use more costly, but thinner insulation material to provide as much interior space as possible; also contributing to their higher cost.
What is the standard cabinet opening for a refrigerator?
The refrigerator opening must have minimum dimensions of 70″ high x 36-1/8″ wide x 24-1/2″ deep as shown at right. If there is an overhead cabinet, allow 1″ for cabinet door clearance with the top trim piece so the cabinet doors can be opened without hitting the top trim.
How much space do you need for a side by side refrigerator?
For your free-standing ‘side-by-side’ refrigerator, you should leave a minimum distance of 50 mm of space free around the sides and at the back of the unit, and then at least 25 mm space at the top.
What is door edge clearance for fridge?
You should allow for a ½ inch to 1 inch of extra space between the refrigerator and side walls. Allow the same amount of clearance at the top. The refrigerator distance from the back wall should be a bit more, about 1 to 2 inches.
Does my fridge stick out too far?
Standard refrigerators are typically 32 to 36 inches deep or more, and since countertops are normally about 25 inches deep (24 inches for the base cabinet with a 1-inch overhang) this means that a standard refrigerator will stick out from adjoining countertops by 6 inches or more.
Can you recess a refrigerator into the wall?
Recessing a refrigerator in an interior wall can increase available space in your kitchen, and can give your cooking space a more streamlined appearance. This project involves building a recessed area in an existing wall that’s sufficient to accommodate the refrigerator.
Can a refrigerator be up against a wall?
The refrigerator should be at least two inches from the wall. Top — If you have back coils, you will need at least two inches of top clearance to dissipate heat, but for bottom coils, as little as one inch can be sufficient. Sides — Regardless of coil placement, the sides require the least amount of space.
What is standard fridge size?
Standard refrigerator sizes range from around 24 to 40 inches in width, 62 to 72 inches in height and 29 to 36 inches in depth. Generally speaking, french door and side-by-side refrigerators will be larger in width and height, though counter-depth models are frequently available in these two configurations.
Will my fridge fit?
