What is the standard size of a counter-depth refrigerator? A standard counter-depth refrigerator generally ranges from about 24–30 inches in depth not including handles as compared to 30–36 inches for a standard size refrigerator..
Page Contents
How far should a fridge stick out past the counter?
Do Fridges Need Space Around Them? In short, the answer is yes. Your fridge will need about two inches of space away from the wall in the back to allow for air circulation. On the sides, you’ll want your fridge to have about 1/8 inch for a standard fridge and about 1 inch on each side for cabinet depth.
What is typical counter-depth?
Countertop depth standard measure is 25 ½ inches, though this varies based on appliance depths, room size, base cabinet size, and the backsplash details. Having a standard depth countertop helps maximize your space and enhances the look of your kitchen.
Can you put a counter depth refrigerator next to a wall?
Appliance says you need to take clearance into account. You should allow for a ½ inch to 1 inch of extra space between the refrigerator and side walls. Allow the same amount of clearance at the top. The refrigerator distance from the back wall should be a bit more, about 1 to 2 inches.
Are 36 inch refrigerators really 36 inches wide?
Standard refrigerator width ranges from 28 to 32 inches wide for slim top-freezer and bottom-freezer models, with wider side-by-side and French door fridges extending to 36 inches. With doors fully ajar, depth may increase to 45 to 50 inches deep.
What is the standard size refrigerator for a house?
Standard refrigerator sizes range from around 24 to 40 inches in width, 62 to 72 inches in height and 29 to 36 inches in depth. Generally speaking, french door and side-by-side refrigerators will be larger in width and height, though counter-depth models are frequently available in these two configurations.
How much space should be around a refrigerator?
Plan Proper Ventilation
Refrigerators need to breathe. If they are entirely boxed in, then there’s not much room for ventilation. When you measure the space for the refrigerator, and compare it to the size of the refrigerator, leave at least 1 inch of extra room for the back and the top of the refrigerator.
How much space is needed between cabinets and refrigerators?
Air must be able to circulate around the box to help the refrigerator run efficiently, avoid overheating and last its full life span. The refrigerator will need minimum clearances of 2-inches from the back wall, 1-inch from the upper cabinet and 1/8-inch on either side of the fridge.
How do I fill the gap between my refrigerator and counter? If you’re looking for an easy way to fill the gaps between your fridge and cabinet, you might want to consider using filler strips. Filler strips are thin pieces of wood or plastic that can be cut to fit the space between your fridge and cabinet. They’re relatively inexpensive and can be found at most hardware stores.
Will a 36 inch refrigerator fit in a 36 inch opening?
Yes, it should. Mine measures 35.75″ wide.
What is the actual width of a 36 inch refrigerator?
Refrigerator Size: 36 inch. Product Width: 35.8in. Product Depth: 7in.
What do you do if your refrigerator doesn’t fit?
Do counter depth refrigerators have less space?
Smaller cubic feet.
Because counter-depth fridges are shallower than standard ones, they tend to offer less cubic feet of interior food storage space. Standard fridge/freezer combos average between 22 and 31 cubic feet of space, while baseline counter-depth fridges are between 20 and 23 cubic feet.
Can I make my fridge shorter?
Renovate the upper cabinet to accommodate the extra height of the fridge. It’s OK to simply cut the bottom half of the upper cabinet to fit over the refrigerator. If you need to remove two of them, cut them both. Take your measurements first, remove the doors, unscrew the cabinets and remove them from the wall.
Can you recess a refrigerator into the wall? Recessing a refrigerator in an interior wall can increase available space in your kitchen, and can give your cooking space a more streamlined appearance. This project involves building a recessed area in an existing wall that’s sufficient to accommodate the refrigerator.
How much gap do you need around a fridge? Refrigerators need to breathe. If they are entirely boxed in, then there’s not much room for ventilation. When you measure the space for the refrigerator, and compare it to the size of the refrigerator, leave at least 1 inch of extra room for the back and the top of the refrigerator.
How much clearance do you need for a French door refrigerator? Standard-depth refrigerators typically measure 30 to 35 inches in depth, as opposed to counter-depth refrigerators that sit flush with cabinetry. 3 Allow 3.75″ of clearance when installing along a wall. This will allow for the door to open 90 degrees without the handle contacting the wall.
How far should a refrigerator be away from the wall?
Side Clearance – Plan for between one-half inch to one-inch of clearance on both sides of the unit. Rear Clearance – Allow between one to two inches of space at the rear of the refrigerator for proper airflow. Top Clearance – Ensure there is a minimum of one-half inch to one-inch of clearance on top of the unit.
How much space is needed between cabinets and refrigerators?
The refrigerator will need minimum clearances of 2-inches from the back wall, 1-inch from the upper cabinet and 1/8-inch on either side of the fridge.
Are counter depth refrigerators too small?
Because counter-depth fridges are shallower than standard ones, they tend to offer less cubic feet of interior food storage space. Standard fridge/freezer combos average between 22 and 31 cubic feet of space, while baseline counter-depth fridges are between 20 and 23 cubic feet. Shallower depth can be limiting.
Why are counter depth refrigerators more expensive?
To achieve the same capacity as a standard appliance, a shallower counter-depth appliance needs to be considerably wider. This can mean a reduction in countertop space, as well as a wider door that requires a larger swing radius. And this special design may cost more than a standard appliance.
Does fridge depth include handles?
Appliance manufacturers have not standardized how you measure the depth of a refrigerator. The refrigerator’s height and width are measured the same, but manufacturers have three ways to do depth measurements: Depth from the back of the fridge to the front of the cooling box – without the door and handles.
How close to a wall can you put a refrigerator?
The refrigerator should be at least two inches from the wall. Top — If you have back coils, you will need at least two inches of top clearance to dissipate heat, but for bottom coils, as little as one inch can be sufficient. Sides — Regardless of coil placement, the sides require the least amount of space.
How much space should be between cabinets and refrigerators?
The refrigerator will need minimum clearances of 2-inches from the back wall, 1-inch from the upper cabinet and 1/8-inch on either side of the fridge.
How much space should be between cabinets and refrigerators? You should keep about half-inch to one-inch space for the side clearance. Also, it would be better to allow one to two inches of space for the rear of the refrigerator. Lastly, you can give in at least half-inch to one-inch space for the top clearance.
How much space do you need for a side by side refrigerator?
For your free-standing ‘side-by-side’ refrigerator, you should leave a minimum distance of 50 mm of space free around the sides and at the back of the unit, and then at least 25 mm space at the top.
