Light blinks while machine is running
If only water is flowing, the machine is executing a user request for either cleaning, descaling or emptying the system..
Page Contents
Why does my Nespresso machine keep flashing?
Fast and steady flashing: The device is in descaling mode. To exit the descaling mode, hold both buttons at the same time for 5-6 seconds. Maybe the device has overheated. Please allow it to cool down for at least 30 minutes.
How do I get Vertuo out of descaling mode?
To exit descaling mode, press and hold the button and the lever at the same time for 3 seconds, or until the light becomes green. Allow the machine to rest for 10 minutes. The machine is now ready for use.
Why is my Nespresso blinking 3 times?
Nespresso Essenza Mini
The LEDs will blink fast 3 times to confirm the machine has been reset to Factory settings. The LEDs will then continue to blink normally as the machine heats up until it’s ready to use. When the LEDs are steady the machine is ready to use.
Why is my Nespresso Vertuo still green and red after descaling?
Edit: Issue solved! Thanks for everyone’s help. So the cause of issue is that after running a descaling/rinse cycle, be sure to MANUALLY EXIT special mode by pressing button and lever at the same time for three seconds until you see full green circle flashes.
Why is my Nespresso Vertuo blinking RED?
RED light blinking continuously and the machine head stops moving. Remove any obstacle, empty the capsule container if necessary, and then open or close the machine head depending on position. If the problem persists, please call our Customer Services Team and quote code WVP14.
How do I put my Nespresso Vertuo in clean mode?
Open the machine head and let the used capsule be ejected. Empty and rinse the capsule container. If the head is open, close the head by pressing the lever down. Push the button 3 times in 2 seconds to start the cleaning cycle.
Why is my descaling light flashing?
The descale light is a common feature in many coffee makers, and basically, when the descale light turns on, it is signaling that your coffee maker actually needs cleaning. The light can come on when particles of calcium or dirt collect on the inner parts of the machine, clogging the machine up.
How do I descale my Vertuo coffee maker? 
Why is my Nespresso machine flashing and not working?
Light blinks and machine is not running.
Check that a fresh capsule is inserted in correct position, that the lever is properly locked and push the button to start. Fill the water tank and push button to start.
How do I fix my Nespresso Vertuo red light?
RED steady light and the machine is NOT running.
- Turn the machine OFF, unplug the power cord, wait for 15 minutes for the machine to cool down.
- Plug the power cord and turn the machine ON by pressing the lever down.
- If the problem persists, please call our Customer Services Team and quote code WVP17.
How do I get out of descaling mode?
To exit the descaling mode, hold the button for at least 7 seconds. The button will stop blinking rapidly and become steady.
Why is my Nespresso Vertuo machine still blinking after descaling?
One of the most common reasons why a Nespresso machine might be experiencing flashing lights is due to it accidentally being put into the descaling process.
How do I stop my Nespresso Vertuo from blinking orange?
A pulsing orange means that your machine needs to cool down. This can happen after a lot of use. Push the button for 3 seconds to turn it off, then push it again to turn on. Wait 20-60 minutes for it to cool down.
What does yellow light on Nespresso Vertuo next mean? Treat the yellow and red light as if it was a yellow and green light; it’s a descaling issue.
How do I pair my Nespresso Vertuo next? 
Why is my Nespresso machine light red and yellow? Treat the yellow and red light as if it was a yellow and green light; it’s a descaling issue.
How do I reset my Nespresso machine after descaling?
Reset to factory settings
- NOTE: Choose special function by pressing the lever down: 1 time for “Descaling”.
- Turn the machine “OFF” by pushing the lever down for 3 seconds.
- To enter “Factory settings” mode, push the button and the lever down at the same time for 3 seconds.
How do I get out of descaling mode?
How do I start my Nespresso Vertuo machine descaling?
Why is my Nespresso Vertuo flashing red?
RED light blinking continuously and the machine head stops moving. Remove any obstacle, empty the capsule container if necessary, and then open or close the machine head depending on position. If the problem persists, please call our Customer Services Team and quote code WVP14.
How do I start my Nespresso Vertuo machine descaling?
How do I unlock my Nespresso Vertuo?
Lock the machine by turning the lever left to the lock symbol on the machine head and unlock by turning right. Hold the button again for at least 7 seconds in “UNLOCKED” position.
Why does my coffee machine keep flashing?
If your brew light flashes, it means your coffee pot needs cleaning. Run an entire cycle with no coffee and white vinegar instead of water. Once the vinegar brew is finished, do a clean water cycle to rinse out the lines a couple of times.
Why is the descaling light still flashing after descaling? If the descale light or message on your DeLonghi coffee machine is still on after you have descaled it, it’s likely that the user has not completely followed the instructions for a descale or it has not been carried out correctly. This can prevent the coffee machine from resetting the message or indicator light.