Positioning your niche at chest to eye-level is a good standard. This translates to a height of about 48 to 60 inches. Ideally, you’ll want to position your niche to fit between the studs which are usually located 16 inches apart. But many contractors can help you with planning the space for a more custom look..
Page Contents
Are wall niches outdated?
Wall niches are nothing new, but designers say they’re seeing more homeowners embrace them as smart storage solutions in pint-size spaces. The best part: They look beautiful. So it’s time to put mounted shelving on, well, the shelf.
How do you put a niche on a tile shower?
How high should a niche be from the floor?
Realistically, most people will want a shower niche to be between 36 to 60 inches (91 to 152cm) from the floor, which makes it a comfortable height to reach for a bottle of shampoo or a bar of soap.
Where should a soap dish be placed in a shower?
The Soap Dish Tile
The best place is on the same wall as the showerhead so that it sits behind the shower spray rather than in it. Ideally, the dish should sit 16 to 20 inches to the left or right of your showerhead if you have the room — or as far as you can install it to one side of the showerhead.
How do you edge a shower niche?
Should a soap dish have holes?
The best soap dishes have generous drainage holes or a tilted design that prevents soap from sitting in puddles. Here are a few things to consider before you buy your own. The ultimate goal of a soap dish is to keep the bar of soap from sitting in water and getting soggy.
Is Bamboo good for a soap dish?
Maintenance: Bamboo is antibacterial by nature, clean, indestructible, and renewable material. Compare with regular wood, bamboo absorbs little moisture and does not shrink or swell. All you need, to clean your bamboo soap dish, is a bit of soapy water to keep it looking good for longer.
What is the purpose of a soap dish? Soap dishes are designed to drain and keep your bar soap dry. The right soap dish will also keep your bathroom counter or sink neat and tidy. While not much thought is required for buying a functional soap dish, a carefully chosen one can enhance the look and feel of your bath.
How high should a soap dish be in a shower?
The standard height for a soap dish is between 44 inches and 54 inches. However, the dish should be located away from the shower spray to avoid water collecting in the dish. A soap dispenser can be installed at a height between 40-48 inches.
How tall is a shampoo bottle?
Average Height of a Shampoo Bottle
The height of most shampoo bottles is between 7 1/2″ to 9 1/2″. Larger pump bottles can be between 9 1/2″ and 10 1/2″ but you’ll need 12″ – 13″ for good access.
Are shower niches hard to keep clean?
A square or rectangular niche design has corners and crevices that can make it difficult to remove grime. Overzealous cleaning and harsh chemicals can also remove waterproofing and damage grout. To clean these areas, use a surface-approved, spray-and-rinse cleaner that can reach every cranny.
How do you finish a shower niche edge?
How do you attach a shelf to a shower?
How do you get old soap dishes off tile? You’ll need to crack the tile to insert a tool for leverage and pull the tile off the wall. Use a chisel and hammer to create cracks on the face of the dish until a piece falls off or a crack opens up. Then insert the chisel into a crack (with the chisel parallel to the wall) and pry up the remaining tile.
How do you replace soap in a tile dish? Make sure the substrate and the new soap dish are dust free and slightly damp. Apply a generous amount of the grout or thinset to the back of the soap dish, making sure it is pushed into the holes. Push some into the substrate holes. Add just a little more to the back of the soap dish and push it into position.
How high should a niche be above a tub?
The ideal height for a bathtub shower niche sits at chest to eye-level when standing — a height of around 48 to 60 inches, as this height suits most adults.
How is niche placement measured?
Do you need a soap dish in the shower?
A soap dish applied to your shower or bath wall improves the look of your bathroom. These functional accents give your bathing area a feeling of permanence, and they leave you more room on wire racks for shampoo and other bottles. The best part of all: no drilling or stud-finding is required.
How do you install recessed dish soap in a shower?
Can you add corner shelves to a tiled shower?
On new tile walls, the correct way to install a ceramic corner shelf is to set it directly into the thin-set mortar during tile installation. But you can add a corner shelf (or another soap dish) on existing tile. Stop by a tile shop and pick up a “flat-back” corner shelf unit (about $20).
Can you put a shower niche on an outside wall?
Don’t Install in an Outside Wall
The problem is that the shower environment is a very moist one, and some of this moisture will always make it into the stud cavity through the wall tile, your tile backer board, and often through your tiled shower niche.
Do you grout between tile and edge trim?
No matter how flush the fitting was when you initially did it, over time, it will erode and create room, becoming even more visually unappealing. So, when trimming, it is a good idea to use grout between tiles and trim. Having said that, there are also several trimming options you can go with.
Where does bullnose tile go in a shower? Bullnose Tiles gets the name from the half rounded edge on the front of the tile. It is used to finish off the edge of a field tile.
