Page Contents
What does cut crosswise mean in sewing?
“Cut the fabric crosswise.” means “Cut the fabric on the crosswise grain, from selvedge to selvedge.” Sometimes I see the instructions “cut crosswise” and it means something like “Take the piece of fabric and cut it again into smaller pieces.” Sometimes this is referred to as sub-cutting.
How do you slice an apple crosswise?
Start peeling, halving and coring your apples. Lay each half on the cutting surface, cut side down. Using a very sharp chef’s knife, slice each half into very thin slices crosswise, aiming for each slice to be no more than 1/8 inch thick.
Does it matter which way you cut fabric?
Cut out your paper pattern pieces accurately before pinning them to your fabric. Ensure you have the grain running in the right direction according to your pattern pieces. The straight grain of a fabric runs parallel to the selvage. The further you move ‘off grain’ the more the fabric can stretch and distort.
What is the direction of the crosswise grain?
Fabric is created by weaving two or more threads at right angles to each other. There is the lengthwise grain and the crosswise grain. The lengthwise grain, called the warp, runs up and down while the crosswise grain, called the weft, is made from threads woven over and under the lengthwise grain from side to side.
How do you cut a large piece of fabric accurately?
Is it correct to let the fabric hang over the edge of the table Why?
Do not allow the fabric to hang over the edge of the table when you are cutting. This is especially true when working with knits and other stretchy fabrics. The weight of the fabric hanging over the table edge will pull the fabric and result in inaccurate cutting.
What is another name for crosswise grain?
Crosswise Grain (Weft)
Which way is Grainline? In summary, the fabric grainline is the straight line that is parallel to the selvages of your fabric.
How do you cut onions crosswise?
Method for Slicing an Onion Crosswise
- Halve the onion root to tip: Cut off the stem end by half an inch.
- Place the onion cut side down: Place the onion halves cut side down onto the cutting board.
- Guide the knife with your fingers:
- Slice the onion halves:
Which way cut fabric?
What does onion frenched mean?
“If a recipe calls for ‘frenched onions’ or tells you to french-cut your onions, this simply means to cut the onion into thin wedges from stem-end to root-end.
Does the direction you cut an onion matter?
When you cut end to end, or with the grain, you cause less damage and release fewer compounds than when you slice through the middle. Slicing through the middle, or against the grain, causes a greater disruption and leaves you with a stronger, more pungent taste.
Can I cut on the cross grain?
Occasionally you’ll want to cut a garment on the cross grain to take advantage of a pattern like horizontal stripes or a border print along the selvedge of the fabric. Don’t worry too much about the difference between cross grain and length grain when this is the case; the difference isn’t so important.
Do you cut fabric selvage to selvage? At the fabric store, the length of the fabric (in yards) is measured along the selvage edge and cut perpendicular to it (cut edge). It is incorrect to cut a fabric piece along the selvage edges as this edge should remain intact and is an essential tool for aligning your sewing patterns in the sewing process correctly.
How do u French an onion? 
How does mcdonalds get their onions so small? They tip the contents into a massive tub in the sink, then fill it up with cold water from the tap. After leaving it to soak for an hour to rehydrate, the worker gets rid of any excess water and the onions are ready to go. The giant tub is then portioned into smaller shakers, ready to be sprinkled onto burgers.
How do you cut potatoes for crosswise?
Using a 4″ Paring Knife or Vegetable Peeler, peel the potato. Rest the potato on a flat spot and slice crosswise to desired thickness. This is a good cut for scalloped potatoes or potatoes au gratin. To create sticks, with the potato resting firmly on the cutting board, slice it lengthwise to desired thickness.
What does cut in half lengthwise mean?
Usually lengthwise means to cut along the “length” of the item.
How do you cut criss cross fries?
Which word means a line that goes crosswise from two points?
across. adverbfrom one side to another; transversely. athwart. crossways. crosswise.
How do you cut cabbage crosswise?
How do you cut a zucchini crosswise?
Hold 3-4 thin strips together with one hand, curling your fingertips against the surface. Turn the strips so that you can cut in a crosswise direction, then chop downwards with your knife. Push the small diced pieces to the side with the flat of your blade and continue until you’ve chopped the whole zucchini.
Which way is lengthwise?
While “crosswise” doesn’t really explain much, “lengthwise” is pretty easy to remember. Essentially, it means to slice vertically along the lengthy side on something, which is particularly simple to figure out when it comes to ingredients that have long sides, like carrots or strips of bacon.
Should I always cut the selvage off? The selvage edges of fabric are sometimes printed, as in this example, and sometimes not as in most batiks. Nevertheless, you should cut them off and not use them in your patchwork piecing. They don’t always press flat, and they often pucker and tighten when washed, meaning what they are sewn to doesn’t lay flat.
What’s the difference between French fried onions and onion rings?
One food that is often thought to be healthier than French Fries is Onion Rings. However, this is not true.
French Fries vs Onion Rings.
| French Fries | Onion Rings |
|---|---|
| – Lower calories, higher fiber content | – Higher calories, lower fiber content |
| – Lower fat | – Significantly higher fat |
• Jan 17, 2019