Reset your refrigerator: First, unplug it (or turn off the power at the circuit breaker), and then wait about five minutes for the electrical charge to clear out of it. Then, power it back on again..
Page Contents
What does the snowflake symbol mean on my freezer?
The general temperature equivalents for the settings on refrigerator models with a Snowflake or “Cold – Colder – Coldest” on the control are as follows: At the Coldest setting the temperature is approximately 34 degrees Fahrenheit in the Fresh Food section and -5 degrees Fahrenheit in the Freezer section.
How do I reset my control panel?
Resetting Control Panel Defaults
- Press the Home button, if necessary.
- Press the arrow buttons and then select Setup.
- Press the arrow butons and then select Restore Default Settings. You see this screen:
- Select one of these options:
- Select Yes to reset the selected settings.
How do you troubleshoot a Samsung refrigerator?
How long do I unplug my fridge to reset it?
Generally, unplugging the refrigerator for 45 to 50 minutes will reset the refrigerators’ settings. Moreover, the recommended reset method could vary based on the refrigerators’ brand, make, and model.
How do I use the control panel on my Samsung refrigerator?
5 Press and hold the Control Lock button for 3 seconds to activate the Control Lock. Control Lock disables all of the controls on the refrigerator to prevent accidents. While active, the Control Lock indicator will light up. To deactivate Control Lock, press and hold the button again for 3 seconds.
What temperature should my Samsung fridge freezer be set at?
On most models, the ideal temperature setting for the refrigerator is 38°F. For the freezer, the ideal temperature is -2°F. However, some models may have different recommendations on the control panel.
What does a blinking temperature light mean on a Samsung refrigerator?
A blinking temperature display is trying to get your attention, typically because the temperature is too high and things need to cool down. It could also be because a door has been left open. Any other blinking lights may require a power cycle to correct the issue.
What are master codes? The Master Code is the primary code for the alarm system. In addition to arming and disarming the alarm system, the Master Code provides access to a user menu.
How do I reset my control panel on my fridge?
Try resetting the control panel by turning off power to the refrigerator briefly. Unplug the refrigerator or turn it off at the circuit breaker for 30 seconds to reset the control.
Why is my Samsung refrigerator control panel blinking?
A blinking status display is trying to get your attention.
Typically because the temperature is too high and things need to cool down. It could also be because a door has been left open.
How do you program a Samsung refrigerator?
How do I reset my Samsung French door refrigerator after a power outage?
What is the default installer code?
The default installer code for a DSC is 5555. The installer code is the code that is used to get into the DSC programming mode so you can set the system up and make changes to panel programming. Having the installer code is the most important part of setting up the system.
How do I find my installer code?
What is the average lifespan of a Samsung refrigerator? Refrigerators tend to make it to the old age of 15 years, sometimes less time and sometimes longer. Normally, you stop using a refrigerator appliance when it suddenly dies, but it’s usually better to replace it before that day comes.
Is it worth repairing a 10 year old Samsung refrigerator? Check the Refrigerator’s Age
A typical refrigerator has a 10- to 20-year lifespan. The longer you have had your refrigerator, the greater the potential repair cost, says The Money Pit. If the refrigerator is less than eight years old, consider repair. If the refrigerator is more than 15 years old, consider replacement.
Is there a reset switch on a Samsung refrigerator?
Open the left door on your Samsung fridge. Find your ice bucket and press the release latch on the right side of the bucket. This will allow you to pull the bucket out. Now that the bucket is out of your way, you should see the reset button on the right side of the ice maker.
What is the installer code for 2GIG?
The default installer code for the 2GIG GC2 panel is 1561. If you are unable to access the Installer Toolbox, and the default installer code is not working, you can perform a hard reset to restore the installer code to default.
What is the most common problem with a Samsung refrigerator?
If your Samsung appliance is having problems staying cool, there can be several most common reasons:
- Dirty condenser coils.
- Malfunctioning condenser fan motor.
- The evaporator fan motor is defective.
- Start relay or capacitor is faulty.
- The evaporator is frosted over.
- A malfunctioning temperature control board.
Why is my Samsung fridge freezer not cooling?
If your refrigerator and freezer are not cooling, try the following: Make sure the appliance is plugged in properly. If it is not, remove the plug from the socket and then re-insert it. If the plug is properly inserted, remove the plug and try plugging another item into the same socket.
Why is my Samsung refrigerator warm but freezer cold?
Evaporator Coils Frosted Over
Typically, the refrigerator’s defrost system melts away any frost that collects. However, if the defrost system is malfunctioning, the evaporator coils will frost over, leaving your Samsung refrigerator warm but freezer cold.
Why is my fridge light flashing?
The problem (defective) LED light module is on the fridge side, located at the top. This LED module is designed with a built in dimmer! That single dimmer controls all 3 lights in your fridge. As the dimmer begins to fail, that causes the flashing, strobing, studio 54 in your kitchen effect.
How do you fix a blinking fridge light?
How do you reset a refrigerator?
Why does my Samsung fridge temperature keep changing?
If your fridge temperature keeps changing, try checking the vents, cleaning the coils, and checking the door seal. Refrigerator temperature may also change due to the door being opened too often, someone else changing the temperature settings. It could also be caused by a failed electrical component.
