“Counter-depth” refers to the distance between the front of your kitchen countertops and your back wall or backsplash. These refrigerators are usually 24–30-inches deep, shallower than most fridges, to line up with the end of your cabinets and fit in nicely with most modern kitchen designs..
Page Contents
Do refrigerators come in different depths?
Standard refrigerators are typically 32 to 36 inches deep or more, and since countertops are normally about 25 inches deep (24 inches for the base cabinet with a 1-inch overhang) this means that a standard refrigerator will stick out from adjoining countertops by 6 inches or more.
How far should a fridge stick out past the counter?
Do Fridges Need Space Around Them? In short, the answer is yes. Your fridge will need about two inches of space away from the wall in the back to allow for air circulation. On the sides, you’ll want your fridge to have about 1/8 inch for a standard fridge and about 1 inch on each side for cabinet depth.
What is standard depth vs counter-depth?
A kitchen’s counters are typically between 24 and 25 inches deep, meaning that standard-depth fridges will stick out from the edge of your countertops by 5 to 10 inches.
Why are counter-depth fridges so expensive?
Manufacturers make fewer counter-depth products compared to standard depth fridges which affects unit-level cost. In addition, manufacturers often use more costly, but thinner insulation material to provide as much interior space as possible; also contributing to their higher cost.
Do counter-depth refrigerators have less space?
Smaller cubic feet.
Because counter-depth fridges are shallower than standard ones, they tend to offer less cubic feet of interior food storage space. Standard fridge/freezer combos average between 22 and 31 cubic feet of space, while baseline counter-depth fridges are between 20 and 23 cubic feet.
Which is better standard depth or counter-depth refrigerator?
If you need to conserve space for a better flow in your kitchen, go with a counter-depth. If you have a large family, though, we recommend regular-depth to ensure you’ll have plenty of space to meet your daily needs. Meanwhile, avoid costly mistakes by carefully measuring your space.
How do you fill gaps between countertops and ranges?
Use a silicone material if there is any height difference between your stovetop and the counter. Silicone is more flexible and will fit the form better. Use stainless steel gap covers to match a metal stove-top seamlessly.
What is standard-depth range? The most “standard” range size is about 30 inches wide, 27–29 inches deep and 36 inches tall. Keep in mind these measurements do not include the backguard, handles, knobs or grates. The second most “standard” stove size is 36 inches wide, so consider this if you want an extra burner or element.
Can you get a shallow fridge?
Counter-depth refrigerators, which are also known as cabinet-depth refrigerators, are shallower, often wider and sit flush with your cabinetry. With a streamlined look, they are a good fit for galley kitchens and kitchens with an island design.
What is counter-depth range?
“Counter-depth,” also known as “cabinet-depth,” is the distance between your back wall and the face of your countertops. Typically you’ll find the depth between 24–25 inches, but variations occur. Counter-depth appliances are designed to sit flush with the standard depth of kitchen cabinetry.
Who makes the shallowest refrigerator?
Above: The Liebherr 36-Inch Counter-Depth 4-Door French Door Refrigerator (CBS2082) is the most shallow on our list at 24 inches deep. It’s $6,419 at AJ Madison. Also available is the Liebherr 36-Inch Counter Depth Bottom-Freezer Refrigerator (CS2080) with a single door and two lower drawers is $5,349 at AJ Madison.
What is typical counter-depth?
Countertop depth standard measure is 25 ½ inches, though this varies based on appliance depths, room size, base cabinet size, and the backsplash details. Having a standard depth countertop helps maximize your space and enhances the look of your kitchen.
Why are ranges not counter-depth?
Slide-in ranges are made to fit snugly, so there is no space between the counter. This also requires a strip of the counter at the back of the range that allows it to slide-in to place. This extra bit of counter explains why a slide-in range’s depth must be less than a freestanding model.
How wide is a counter-depth fridge? For one thing, counter-depth fridges are wider to make up for some loss in depth. Standard fridges are 30 to 36 inches wide, while counter-depth refrigerators are usually at least 36 inches wide. They’re also taller, starting at 70 inches, while standard fridges are between 67 and 70 inches.
How much shallower is a counter-depth refrigerator? Counter-depth refrigerators are shallower and wider than standard-depth refrigerators, with a depth range of 23 to 27 inches. These units usually have French doors or side-by-side doors, with a smaller freezer compartment on the left and a larger refrigerated section on the right.
Does Sub Zero make a counter-depth refrigerator? Sub-Zero makes only counter-depth refrigerators with a depth of 24 inches. This means the refrigerator (excluding handles) is approximately the same depth as your counters and cabinets.
Do they make shallow refrigerators?
Depth Comparison
By shaving off a few inches, counter depth refrigerators offer a shallower build than their standard depth counterparts. However, the disadvantage to this is that you lose some interior space and will have less storage capacity for food items.
How deep is a counter-depth fridge?
Most counter depth refrigerators, including KitchenAid brand counter depth refrigerators, are around 24-30 inches deep. While shallower than a standard size fridge, it offers a seamless configuration between your kitchen cabinets, without having to remodel.
Why would you get a counter depth refrigerator?
The Benefits
Many will choose a counter-depth refrigerator simply because this style gives the kitchen a more uniform profile. The refrigerator does not protrude several inches past the counter. More convenient access to contents. Finding and retrieving contents from a counter-depth refrigerator is much easier.
Do you lose space with a counter depth refrigerator?
By shaving off a few inches, counter depth refrigerators offer a shallower build than their standard depth counterparts. However, the disadvantage to this is that you lose some interior space and will have less storage capacity for food items.
Why are counter depth refrigerators not counter-depth?
The Term Counter-Depth Can Be Misleading
Especially in a large kitchen, it’s not unusual to find bottom cabinets that are much deeper than the standard 24-inch depth and the counter will protrude further, usually by an inch. So counter-depth can be deeper than the average, ranging from 25 to 30 inches.
How many inches is counter-depth?
Most kitchen counters are about 24–25 inches in depth, so when you’re looking for a counter-depth fridge, you’ll need a model with similar depth.
What is standard counter-depth?
Countertop depth standard measure is 25 ½ inches, though this varies based on appliance depths, room size, base cabinet size, and the backsplash details. Having a standard depth countertop helps maximize your space and enhances the look of your kitchen.
Can you recess a refrigerator into the wall? Recessing a refrigerator in an interior wall can increase available space in your kitchen, and can give your cooking space a more streamlined appearance. This project involves building a recessed area in an existing wall that’s sufficient to accommodate the refrigerator.