This usually is due to the water filter being clogged or a restricted water supply. It is recommended to change the water filter first but if the condition still occurs then you want to check for a saddle valve, a water valve not turned on all the way or a kinked water supply line..
Page Contents
How do I troubleshoot my Frigidaire ice maker?
- Reset The Ice Maker.
- Check the Water Line.
- Replace The Water Filter.
- Ice Stuck in the Mold.
- The icemaker is Not Level.
- Check the Water Inlet Valve.
- Malfunctioning Door Switch.
- Malfunctioning or Frozen Ejector Assembly.
Is there a reset on a Frigidaire refrigerator?
Why is my ice maker not making ice but water works?
If your ice maker isn’t producing ice at all or is producing crescents or cubes that are smaller than usual, it’s typically indicative of a clog somewhere along the supply line. Cause: A common cause for a clog is frozen water in the line. Fix: To repair a frozen line, slide the refrigerator and unplug it.
Why is my ice maker not working but water does?
Make sure that the water pressure to the valve is at least 20 psi. If the water pressure is sufficient, use a multimeter to check for power to the water inlet valve. If the water inlet valve has sufficient pressure and is getting power, but the ice maker won’t fill with water to make ice, replace the water inlet valve.
What does error code SY EF mean on a Frigidaire refrigerator?
The SY EF error code on a Frigidaire refrigerator means a problem with the freezer evaporator fan motor. There’s likely an ice buildup preventing the fan blades from turning, caused by a faulty door gasket or restricted airflow inside the compartment.
How do you reset the H1 code on a Frigidaire refrigerator?
How To Fix A Frigidaire Refrigerator Error Code H1
- Step 1 – Test the thermistor. The purpose of the thermistor in your fridge is to monitor the temperature and send the readings to the control board.
- Step 2 – Replace the thermistor.
- Step 3 – Check that the new thermistor works.
How do you reset the water dispenser on a Frigidaire refrigerator?
Press a glass against the water dispenser lever and fill the glass with water. Empty it and repeat for four minutes to flush the system. Turn the ice maker on. Press and hold the “Water Filter” button for three seconds to reset the filter status.
How do you reset a refrigerator after changing water filter?
Why is my ice maker not working but water does?
Cause: There is also a possibility that the water filter for the ice maker is clogged. Fix: Locate and replace the water filter. Filters for ice makers are typically located inside the refrigerator (to keep them from freezing).
How do you troubleshoot an ice maker?
Ice Maker Not Making Enough Ice
- Check your refrigerator and make sure it’s perfectly level.
- Check your ice maker unit and make sure it’s level.
- Check the water supply line for damage, pinching, or kinks.
- Check the fill cup; make sure it’s aligned correctly with the water funnel.
How do I test my ice maker water line?
How do you troubleshoot an ice maker?
How do you reset the water filter on a Frigidaire Gallery?
Frigidaire – Press the “Reset” button and hold. This causes the indicator light to flash. GE (General Electric) – Press and hold for 10 seconds the “Reset” button.
How do you reset a Frigidaire freezer after a power outage? How Do You Reset a Frigidaire Refrigerator after a Power Outage?
- Unplug the freezer for at least 20 minutes.
- Plug the freezer back in.
- Press and hold the alarm reset button for 3 seconds.
- Quickly, press the DOWN ARROW 3 times.
- Press the up arrow one time. Choose the temperature you want for your freezer.
What does a blinking green light on Frigidaire freezer mean? FAQs Why is the green LED Power On Light flashing? This light will flash continuously when the appliance is first plugged in until the unit reaches the selected temperature.
Why is my ice maker not making ice but water works?
Make sure that the water pressure to the valve is at least 20 psi. If the water pressure is sufficient, use a multimeter to check for power to the water inlet valve. If the water inlet valve has sufficient pressure and is getting power, but the ice maker won’t fill with water to make ice, replace the water inlet valve.
Where is the Frigidaire reset button?
The reset button on your Frigidaire Freezer is likely on the inside. When you’re resetting your Frigidaire freezer, unplug it from the wall for 15 to 20 minutes and then plug it back in. Next, hold down the alarm reset button for three seconds and then press the down arrow three times and the up arrow once.
Is there a reset button on a Frigidaire side by side refrigerator?
Press the Power Cool and Power Freezer buttons at the same time, on the display panel. Hold the buttons for a short time. The refrigerator will be reset and the fridge will start cooling again.
Where is the water filter reset button on Frigidaire refrigerator?
How do you jumpstart an ice maker?
How do I know if my fridge water line is clogged?
Unclog Refrigerator’s Water Dispenser Hose
Then hold the water button at the front of your fridge down to see if any water comes through. If it does, it’s likely there was an air clog in the line which should now be removed. If no water comes through, it’s more likely your line was blocked by ice.
How do I know if my ice maker is clogged?
How do you put a Frigidaire refrigerator in diagnostic mode? How to Enter the Diagnostic Mode on a Frigidaire Refrigerator
- Press and hold the “Freezer Temperature UP” and the “Freezer Temperature DOWN” buttons at the same time.
- Release and press the buttons together twice more within five seconds to enter the diagnostic mode to test the Frigidaire.
