There is a Test button on Samsung ice makers. (Most models will require you to remove the ice bucket to view the ice maker.) Once you find this button: Press and hold the Test button until you hear a chime (which may take up to 10 seconds)..
Page Contents
Why is my Samsung refrigerator not dispensing ice?
If your Samsung refrigerator stops dumping ice, accidentally dispenses crushed ice, or makes ice that tastes bad, there is usually a simple solution. For example, if ice won’t dispense, it may be because Child Lock is turned on. Or, if your ice tastes funny, you may need to change the water filter.
Why is my ice maker not making ice but water works?
Make sure that the water pressure to the valve is at least 20 psi. If the water pressure is sufficient, use a multimeter to check for power to the water inlet valve. If the water inlet valve has sufficient pressure and is getting power, but the ice maker won’t fill with water to make ice, replace the water inlet valve.
How do I unlock my Samsung refrigerator ice dispenser?
Why is my ice maker not dispensing ice?
If your ice maker isn’t producing ice at all or is producing crescents or cubes that are smaller than usual, it’s typically indicative of a clog somewhere along the supply line. Cause: A common cause for a clog is frozen water in the line. Fix: To repair a frozen line, slide the refrigerator and unplug it.
Where is the reset button on a Samsung refrigerator?
Check on top of the fridge door for a small panel that can flip up. Underneath, there will be a button or a switch labelled “reset.” Pressing or flipping this switch will reset fridges with the feature.
How long does it take for a Samsung ice maker to make ice?
The ice-making interval will be reduced from 90 minutes to 55 minutes. If the ice bucket fills in fewer than 10 hours then Power Freeze will stop automatically. Note: if you have just installed your refrigerator it will take 6 to 12 hours for the refrigerator to produce ice.
How long does it take for Samsung ice maker to make ice after reset?
Open the water valve to the refrigerator. Plug the refrigerator back into power. Turn the ice maker ON (if applicable) and give the ice maker at least 3 to 12 hours to make ice.
How do I reset my ice maker? Unplug the machine and wait 10 seconds. Plug the machine back in and press the ON button. You should see a blue light appear, letting you know that the machine has been reset.
Why is my ice maker not working but water does?
Cause: There is also a possibility that the water filter for the ice maker is clogged. Fix: Locate and replace the water filter. Filters for ice makers are typically located inside the refrigerator (to keep them from freezing).
Where is the reset button on my ice maker?
You can find the reset button at the bottom of the ice maker. Remove the ice tray to locate it. Remove the ice tray. The red button you see is the reset button.
How do I force my ice maker to cycle?
If your gear has a small notch in it, then you may need a flat-head screwdriver. Use it to turn your gear counterclockwise until you hear the mentioned click. In both situations, the click that is heard will force the ice maker to cycle.
How do I manually reset my ice maker?
Unplug the machine and wait 10 seconds. Plug the machine back in and press the ON button. You should see a blue light appear, letting you know that the machine has been reset.
Why isn’t my icemaker working?
How do I unlock my Samsung ice and water dispenser? You can unlock it by touching and holding the Door Alarm button until you hear a chime; it usually takes about 3 seconds. Dispenser Lock: This feature appears on select models. It disables the water and ice dispenser, but other parts of the control panel will still function.
Where is the test button on my Samsung Ice Maker? Locate the test button. It’s a rectangular button near the front of the ice maker, on the side or bottom. There may be writing that says TEST or an arrow pointing at it. Press and hold the button until you hear a chime indicating that the test is starting.
How do you reset a Samsung Control Board? Press and hold the buttons for 8 to 10 seconds to reset the display. The refrigerator display can be reset by pressing and holding the energy save and lighting button for 10 seconds.
Where is the ice maker test button on a Samsung refrigerator?
Locate the test button. It’s a rectangular button near the front of the ice maker, on the side or bottom. There may be writing that says TEST or an arrow pointing at it. Press and hold the button until you hear a chime indicating that the test is starting.
How do I know if my ice maker is working?
To check if the icemaker itself is working:
- If the icemaker mold is empty, you can manually pour about 4 ounces of water in the icemaker mold.
- Wait about 2 hours.
- If the icemaker has dropped ice cubes out from the mold, you know the icemaker itself is working.
Why is the ice off light on Samsung refrigerator?
Light is telling you that the ice maker is off. Hold ice off button release. light will go off. Wait 24 hours for ice.
Where is the control panel on my Samsung refrigerator?
Some people might not be aware that your Samsung refrigerator has a control panel on the front. This is where you can change the settings for your fridge, like the temperature.
How do I reset the control panel on my Samsung refrigerator?
Reset your refrigerator: First, unplug it (or turn off the power at the circuit breaker), and then wait about five minutes for the electrical charge to clear out of it. Then, power it back on again.
Why does my fridge dispense water but not ice?
If the water inlet valve is defective, or if it has insufficient pressure, it won’t allow water to flow through. As a result, the ice maker won’t make ice. The valve requires at least 20 psi to function properly. Make sure that the water pressure to the valve is at least 20 psi.
Where is the reset button on ice maker?
You can find the reset button at the bottom of the ice maker. Remove the ice tray to locate it. Remove the ice tray. The red button you see is the reset button.
Where is Samsung ice maker reset button? The reset button is located on the front of the ice maker, underneath the motor housing, past the front cover. Press and hold the reset button (you’ll need to apply some pressure here) until you hear the ice tray motor begin to torque, then release.
